toll-free: 888-27-FIBER
On-line warehouse of fiber optic equipment
FMC WDM (single strand) Fast Ethernet converter 60Km, type A (Tx/Rx:1310/1550nm) - Unmanaged
Product description
FMC-10-100 series is the newest family of Fast Ethernet fiber optic media converters carried by FO4ALL. The FMC media converters are noticed for their simplicity: no management features, guaranteed reliability and extremely affordable cost. Units are available with SC type fiber optic connector. FMC-10-100 WDM family are WDM single strand single-mode (1310nm/1550nm) optical wave converters, with auto-negotiation 10/100 and MDI/MDI-X features for the Fast Ethernet RJ45 UTP interface.
The FMC-10-100-SC60A WDM model covers operating distance of 60Km and has a type A optical module with Tx:1310nm and Rx:1550nm. The optical power budget is 29dB and diode is Distributed Feedback type. The FMC-10-100-SC60A works ONLY in pair with FMC-10-100-SC60B type media converter.
Even without the SNMP management support, FMC series support Link-Fault-Pass through function (LFP - an extremely useful feature to easily debug faulty fiber links), Far-End-Fault function (FEF), acts on a Store-and-Forward switching platform and can carry Jumbo data packets up to 9K size. Used with their compatible FMC-CH08 fiber optic chassis they can be aggregated up to 16 units in a 19" wide and 2U height space only.
FMC series offer the same ability to be aggregated in a the central FMC-CH08 chassis, like their FIB1 managed counterparts. In an always changing and growing networking environment, such a versatile feature allows network operators to switch to higher density and aggregation hubs without the need to purchase new fiber optic converters. This simple, but so reliable idea, is making the FMC series media converters a very clever choice for data carriers and service providers.
Technical specifications
Fiber power budget according to available models
Additional information on FMC Fast series:
PDF Datasheet; PDF Installation Manual.
Note: On special request of customer, based on manufacturer confirmation, this family of media converters can be also provided with ST or FC type optical connectors. For such options, please contact our sales department by e-mail or call us.
Request more information(please use below form to get more information about our product)
Only the e-mail field is required. To expedite our sales support please fill in the telephone number. To deliver printed product literature to you, please fill in Name and Address.
FMC-10-100 series is the newest family of Fast Ethernet fiber optic media converters carried by FO4ALL. The FMC media converters are noticed for their simplicity: no management features, guaranteed reliability and extremely affordable cost. Units are available with SC type fiber optic connector. FMC-10-100 WDM family are WDM single strand single-mode (1310nm/1550nm) optical wave converters, with auto-negotiation 10/100 and MDI/MDI-X features for the Fast Ethernet RJ45 UTP interface.
The FMC-10-100-SC60A WDM model covers operating distance of 60Km and has a type A optical module with Tx:1310nm and Rx:1550nm. The optical power budget is 29dB and diode is Distributed Feedback type. The FMC-10-100-SC60A works ONLY in pair with FMC-10-100-SC60B type media converter.
Even without the SNMP management support, FMC series support Link-Fault-Pass through function (LFP - an extremely useful feature to easily debug faulty fiber links), Far-End-Fault function (FEF), acts on a Store-and-Forward switching platform and can carry Jumbo data packets up to 9K size. Used with their compatible FMC-CH08 fiber optic chassis they can be aggregated up to 16 units in a 19" wide and 2U height space only.
FMC series offer the same ability to be aggregated in a the central FMC-CH08 chassis, like their FIB1 managed counterparts. In an always changing and growing networking environment, such a versatile feature allows network operators to switch to higher density and aggregation hubs without the need to purchase new fiber optic converters. This simple, but so reliable idea, is making the FMC series media converters a very clever choice for data carriers and service providers.
Technical specifications
| Interfaces: | RJ45 copper IEEE 802.3 10Base-T, 802.3u 100Base-TX compliant and SC, 100Base-FX compliant |
| Operating wavelength: | Tx:1310nm/Rx:1550nm WDM single strand fiber |
| Ethernet interface: | Supports 10/100Base-T/TX, Full, Half duplex n-way (Auto-Negotiation). Supports Full, Half duplex, 10/100 speed manual selections. Transmission Packet Rate for 10/100Base-T/TX : 14880 per second /148800 per second. Copper TP cable 4 pair Cat. 3 or 5 UTP |
| Features: | FEF (Far-End-Fault) and LFP (Link-Fault-Pass through) |
| Operating distance: | 60Km on 9/125um single strand fiber |
| Optical connector: | single SC type |
| Front LEDs: | PWR, LLF, Fiber Link, TP Link, Duplex, Speed |
| Power: | External 90-260V AC switching adapter 9VDC@1A with NEMA1-15(2 blades only), US type main plug |
| Temperature: | 0 — 50°C (Operating); 0 — 70°C (Storage) |
| Humidity: | 20 — 80% non condensing (Operating); 0 — 90% (Storage) |
| Consumption: | less than 4W |
| Dimensions(WxDxH): | 73mm x 108mm x 23mm |
| Weight: | 160g (without AC adapter) |
| Compliance: | FCC part 15, Subpart B, Class A, ANSI C63.4:2003 CE EN55022:2006, Class A EN55024:1998+A1:2001+A2:2003 LVD: EN 60 950-1:2001 |
| MTBF: | 65,000 hours |
Fiber power budget according to available models
| Model | Distance | Lambda | Min. Output (dBm) | Sensitivity (dBm) | Power Budget (dB) |
| FMC-10/100-W20A | 20Km | Tx:1310nm Rx:1550nm | -15 | -32 | 17 |
| FMC-10/100-W20B | 20Km | Tx:1550nm Rx:1310nm | -18 | -32 | 14 |
| FMC-10/100-W40A | 40Km | Tx:1310nm Rx:1550nm | -7 | -32 | 25 |
| FMC-10/100-W40B | 40Km | Tx:1550nm Rx:1310nm | -8 | -32 | 24 |
| FMC-10/100-W60A | 60Km | Tx:1310nm Rx:1550nm | -5 | -34 | 29 |
| FMC-10/100-W60B | 60Km | Tx:1550nm Rx:1310nm | -5 | -34 | 29 |
| FMC-10/100-W80A | 80Km | Tx:1310nm Rx:1550nm | -2 | -34 | 32 |
| FMC-10/1000-W80B | 80Km | Tx:1550nm Rx:1310nm | -2 | -34 | 32 |
Additional information on FMC Fast series:
Note: On special request of customer, based on manufacturer confirmation, this family of media converters can be also provided with ST or FC type optical connectors. For such options, please contact our sales department by e-mail or call us.
Request more information(please use below form to get more information about our product)
Only the e-mail field is required. To expedite our sales support please fill in the telephone number. To deliver printed product literature to you, please fill in Name and Address.
- 2009 Catalogues
- Unmanaged Fiber Media Converters
- Managed Fiber Media Converters
- Managed T1 Media Converters
- Rack Mount Fiber Media Converters
- SFP Transceivers
- GBIC Transceiver
- XFP Transceivers
- PDH Fiber MUXes
- SDH Fiber Mux
- CWDM Solutions
- Fiber Gateways
- L2 Fiber Switches
- L3 Fiber Switches
- DVI & HDMI Fiber Extenders
- Straight Cords (jumper cables)
- Hybrid Cords (adapter cables)
- Reseller Program
- News
 |
 |