toll-free: 888-27-FIBER
On-line warehouse of fiber optic equipment
POTS (RJ11 telephone) over fiber optic converter, singlemode SC, 30Km, FXO/FXS mode
Product description
The FRM220-FXO-FXS-SC030 is a POTS (RJ11) port over fiber optic media converter. The PSTN two-wire POTS telephone port can be configured either as an FXO (PBX trunk) or FXS (telephone set/fax machine/dial-up modem) device just by a simple DIP switch setting. Using a pair of converters, a telephone line can be extended over a fiber optic circuit, providing full service and features like Caller ID. The converter can be used in service mode, alowing connection of 2 telephone sets in between. FRM220-FXO-FXS-SC030 operates on singlemode fiber up to 30Km (19mi) distance. The fiber media converter is equipped with dual SC type optical connector.
When the FRM220-FXO-FXS-SC030 POTS over fiber converter is placed in the FRM220 rack with in-band and SNMP management, the converters status, type, version, fiber link status, POTS RJ11 port status and alarms can all be displayed. Configuration is also available to enable or disable the port, reset the port, do far end fault setting, and initiate local or far end loop-back tests.
The uniqueness of FRM220-FXO-FXS-SC030 is given by the ability to convert from standalone media converter to card for the managed FRM220 chassis, in matter of minutes. In an always changing and growing networking environment, such a versatile feature allows network operators to switch to higher density and aggregation hubs without the need to purchase new fiber optic converters. This simple, but so reliable idea, make the FRM220-FXO-FXS-SC030 media converter the perfect choice for media converters by data carriers and service providers.
Technical specifications
Fiber power budget for multimode models
Additional information on FRM220-FXO-FXS-SC030:
PDF datasheet; PDF Installation Manual.
Note: Additional single-mode versions of FRM220-FXO-FXS-SC030 POTS over fiber converter for distances up to 120Km and also BiDi single strand 20Km are available on request, some of them with very short delivery choices. For such converters, please contact our sales department by e-mail or call us.
Request more information(please use below form to get more information about our product)
Only the e-mail field is required. To expedite our sales support please fill in the telephone number. To deliver printed product literature to you, please fill in Name and Address.
The FRM220-FXO-FXS-SC030 is a POTS (RJ11) port over fiber optic media converter. The PSTN two-wire POTS telephone port can be configured either as an FXO (PBX trunk) or FXS (telephone set/fax machine/dial-up modem) device just by a simple DIP switch setting. Using a pair of converters, a telephone line can be extended over a fiber optic circuit, providing full service and features like Caller ID. The converter can be used in service mode, alowing connection of 2 telephone sets in between. FRM220-FXO-FXS-SC030 operates on singlemode fiber up to 30Km (19mi) distance. The fiber media converter is equipped with dual SC type optical connector.
When the FRM220-FXO-FXS-SC030 POTS over fiber converter is placed in the FRM220 rack with in-band and SNMP management, the converters status, type, version, fiber link status, POTS RJ11 port status and alarms can all be displayed. Configuration is also available to enable or disable the port, reset the port, do far end fault setting, and initiate local or far end loop-back tests.
The uniqueness of FRM220-FXO-FXS-SC030 is given by the ability to convert from standalone media converter to card for the managed FRM220 chassis, in matter of minutes. In an always changing and growing networking environment, such a versatile feature allows network operators to switch to higher density and aggregation hubs without the need to purchase new fiber optic converters. This simple, but so reliable idea, make the FRM220-FXO-FXS-SC030 media converter the perfect choice for media converters by data carriers and service providers.
Technical specifications
| POTS Line: | FXO (Impedance:600ohms, REN:0.4), FXS (Feedback Voltage: 48VDC, Ring: 90Vp-p) |
| Interfaces: | RJ11 port 600Ohms and dual SC 155M fiber port |
| Operating wavelength: | 1310nm singlemode |
| Operating distance: | 30Km on 9/125um fiber |
| Optical connector: | SC dual type |
| Front LEDs: | Power, Fiber Link, Di/Do, Test mode |
| Power: | External 90-260V AC switching adapter 9VDC@1A with NEMA1-15(2 blades only), US type main plug |
| Temperature: | 0 — 50°C (Operating); 0 — 70°C (Storage) |
| Humidity: | 20 — 80% non condensing (Operating); 0 — 90% (Storage) |
| Consumption: | less than 5W |
| Dimensions(WxDxH): | 88mm x 155mm x 23mm |
| Weight: | 330g (without AC adapter) |
| Compliance: | CE, FCC Class A |
| MTBF: | 65,000 hours |
Fiber power budget for multimode models
| Model | Distance | Lambda | Min. Output (dBm) | Sensitivity (dBm) | Power Budget (dB) |
| FRM220-FXO/S-SC030 | 30Km | 1310nm | -15 | -35 | 20 |
Additional information on FRM220-FXO-FXS-SC030:
Note: Additional single-mode versions of FRM220-FXO-FXS-SC030 POTS over fiber converter for distances up to 120Km and also BiDi single strand 20Km are available on request, some of them with very short delivery choices. For such converters, please contact our sales department by e-mail or call us.
Request more information(please use below form to get more information about our product)
Only the e-mail field is required. To expedite our sales support please fill in the telephone number. To deliver printed product literature to you, please fill in Name and Address.
- 2009 Catalogues
- Unmanaged Fiber Media Converters
- Managed Fiber Media Converters
- Managed T1 Media Converters
- Rack Mount Fiber Media Converters
- SFP Transceivers
- GBIC Transceiver
- XFP Transceivers
- PDH Fiber MUXes
- SDH Fiber Mux
- CWDM Solutions
- Fiber Gateways
- L2 Fiber Switches
- L3 Fiber Switches
- DVI & HDMI Fiber Extenders
- Straight Cords (jumper cables)
- Hybrid Cords (adapter cables)
- Reseller Program
- News
 |
 |