toll-free: 888-27-FIBER
On-line warehouse of fiber optic equipment
FIB1-T1R, T1(100ohms) to fiber optic media converter, SC, multimode 2Km, SNMP
Product description
The FIB1-T1R-SC2F is a fiber media converter for G.703 T1 transmission/transport and features an RJ-48c connector for connection to 100 Ohm twisted pair wiring. FIB1-T1R-SC2F operates on multimode fiber up to 2Km (1.3mi) distance. The fiber media converter is equipped with dual SC type optical connector. The media converter is also sometimes called T1 fiber modem.
When the FIB1-T1R card is placed in the FRM301 rack with SNMP management, the card status, type, version, fiber link status, E1 or T1 link status and alarms can all be displayed. Configuration is also available to enable or disable the port, reset the port, do far end fault setting, and initiate local or far end loop-back tests.
The uniqueness of FIB1-T1 is given by the ability to convert from standalone media converter to card for FRM301 chassis, in matter of minutes. In an always changing and growing networking environment, such a versatile feature allows network operators to switch to higher density and aggregation hubs without the need to purchase new fiber optic converters. This simple, but so reliable idea, made the FIB1-T1 media converter the perfect choice for media converters by data carriers and service providers.
Technical specifications
Fiber power budget for multimode models
Additional information on FIB1-T1R:
PDF datasheet; PDF Installation Manual.
Note: Versions of FIB1-T1R-SC2F with ST or FC optical connectors are available on request. For such converters, please contact our sales department by e-mail or call us.
Request more information(please use below form to get more information about our product)
Only the e-mail field is required. To expedite our sales support please fill in the telephone number. To deliver printed product literature to you, please fill in Name and Address.
The FIB1-T1R-SC2F is a fiber media converter for G.703 T1 transmission/transport and features an RJ-48c connector for connection to 100 Ohm twisted pair wiring. FIB1-T1R-SC2F operates on multimode fiber up to 2Km (1.3mi) distance. The fiber media converter is equipped with dual SC type optical connector. The media converter is also sometimes called T1 fiber modem.
When the FIB1-T1R card is placed in the FRM301 rack with SNMP management, the card status, type, version, fiber link status, E1 or T1 link status and alarms can all be displayed. Configuration is also available to enable or disable the port, reset the port, do far end fault setting, and initiate local or far end loop-back tests.
The uniqueness of FIB1-T1 is given by the ability to convert from standalone media converter to card for FRM301 chassis, in matter of minutes. In an always changing and growing networking environment, such a versatile feature allows network operators to switch to higher density and aggregation hubs without the need to purchase new fiber optic converters. This simple, but so reliable idea, made the FIB1-T1 media converter the perfect choice for media converters by data carriers and service providers.
Technical specifications
| Standards: | T1: ITU-T G.703, G.704, AT&T TR-62411, ANSI T1.403 |
| Interfaces: | RJ48c 100ohm balanced T1 connector and dual SC 155M fiber port |
| Operating wavelength: | 1310nm multimode |
| Operating distance: | 2Km on 62.5/125um fiber, works also on 50/125um fiber |
| Optical connector: | SC dual type |
| Front LEDs: | Power, Fiber Link, T1 Link, Test mode |
| Power: | External 90-260V AC switching adapter 9VDC@1A with NEMA1-15(2 blades only), US type main plug |
| Temperature: | 0 — 50°C (Operating); 0 — 70°C (Storage) |
| Humidity: | 20 — 80% non condensing (Operating); 0 — 90% (Storage) |
| Consumption: | less than 5W |
| Dimensions(WxDxH): | 85.6mm x 122.6mm x 20mm |
| Weight: | 310g (without AC adapter) |
| Compliance: | CE, FCC Class A |
| MTBF: | 65,000 hours |
Fiber power budget for multimode models
| Model | Distance | Lambda | Min. Output (dBm) | Sensitivity (dBm) | Power Budget (dB) |
| FIB1-T1R-SC2F | 2Km | 1310nm | -20 | -31 | 11 |
Additional information on FIB1-T1R:
Note: Versions of FIB1-T1R-SC2F with ST or FC optical connectors are available on request. For such converters, please contact our sales department by e-mail or call us.
Request more information(please use below form to get more information about our product)
Only the e-mail field is required. To expedite our sales support please fill in the telephone number. To deliver printed product literature to you, please fill in Name and Address.
- 2009 Catalogues
- Unmanaged Fiber Media Converters
- Managed Fiber Media Converters
- Managed T1 Media Converters
- Rack Mount Fiber Media Converters
- SFP Transceivers
- GBIC Transceiver
- XFP Transceivers
- PDH Fiber MUXes
- SDH Fiber Mux
- CWDM Solutions
- Fiber Gateways
- L2 Fiber Switches
- L3 Fiber Switches
- DVI & HDMI Fiber Extenders
- Straight Cords (jumper cables)
- Hybrid Cords (adapter cables)
- Reseller Program
- News
 |
 |